Author Archives: Maxime Lacroix

Compatibility table between MX-5 ND RF & Soft Top (1.5L vs 2.0L)

When the RF Edition (Power Retractable Hardtop) of the 2016+ ND MX-5 has been released, everyone was drooling about the look of the new car. After seeing the vehicle in person, we noticed that some parts would not fit between soft top edition and hardtop (RF) edition.

Here’s is a table that Autoexe built. It’s not technically for the compatibility between RF and Soft Top, but between the 1.5L and 2.0L to begin with. So, the table shows in yellow the products that are technically not fitting between 1.5L and 2.0L and in red they are definitely not fitting between the MX-5 RF and the MX-5 Soft Top.

So, here is the table :

RF vs Soft Top

As you can see, in red highlight, so far, the only item that we noticed that does not fit the RF and Soft Top so far is the Rear Spoilers because the trunk has a slightly different shape. The other item that is not on this list that does not fir the RF would be the Roll Bars or Roll Cages because of the top mechanism.

1.5L vs 2.0L

The items that are not compatible between both engines are the Ram Air Intake, Intake Suction Kit, Ignition Coil Cover, Flywheel, Clutch Line and LSD. Please note that also, certain Front Strut Bars are not compatible between 1.5L and 2.0L.

If you are not sure in the compatibility of a product, please don’t hesitate to ask us at info@rev9autosport.com. We always can verify for you, but our website is always up to date.

The ND MX-5s at Tokyo Auto Salon 2017

Since last year, the Roadsters are more popular than ever at Tokyo Auto Salon. 2017 is no exception, and if you missed our blog post about the RF & NB at TAS2017, don’t forget to check it out! This blog post is about the Soft Top ND that were displayed during the show.

 

Here are the NDs that caught our attention:

Autoexe :

Autoexe came up with their new ND Front Bumper that was released just before New Year’s evening. It’s really nice and gives the ND an even more aggressive front end. The car was also rocking 17” Rays Gram Lights 57XTREME which really looked nice on there. The back of the vehicle was showing their ND Rear Spoiler and their single-tip ND Premium Tail Muffler.

Knight Sports :

The car was unchanged from what they brought last year, except for the new ND Side Steps. They also showed nicely the ND Front & Rear Diffusers, ND Rear Spoiler & ND Titanium Exhaut on the vehicle and some 17” Advan RZ-II Wheels & ND Big Brake Kit.

Leg Sport :

Leg Sport came up with their (already) legendary Mariner Blue ND. This year, they were showing their newly released ND Roll Bar that comes with panels (made of carbon fiber) to fill the area of the plastics that are removed. It bolts to the floor and does not require modification to the vehicle.

They also had their ND Winshield Washer & Oil Catch Can Combo, ND Silicon Intake (soon to be released for 2.0L engine) & ND Front Strut Bar.


From the outside, it was rocking their ND Front Lip, their ND Carbon Fiber Front Grille (with intake), a funky graphic showing what the engine bay looks like and their ND Ducktail Spoiler! The wheels on it were 17” WedSports SA72R. It also had their awesome sounding ND Titanium Exhaust.

 

Mazda :

Mazda showed just one soft top ND at the show. It was a very subtle change that only the Roadster amateurs would notice… the car was Classic Red. It looked pretty fine, if you ask me!

They also showed a girl, and I noticed that there was a MX-5 cup hidden behind her! The 17” Rays ZE40 really look nice on there, light & strong!

 

Monza Japan :

Monza Japan is a company that sells wheels and they collaborated with Ducks Garden to show their ND Front Bumper, ND Side Skirts, ND Rear Spoiler & ND Rear Bumper. They also were rocking Endless Big Brake Kit.

 

RK Design :

RK Design came this year with their pretty neat ND Demo Car that has satin paint job. The car had their ND Front Canards, ND Rear Spoiler, ND Quad-Tip Muffler, ND Side Inlet Ducts & ND Side Outlet Ducts. The car also had 17” RK Design Wheels & Rotora Big Brake Kit.

R-Spec :

R-Spec showed their demo car that has ND Half Bumper (inspired by Jaguar), 18” Work Meister Wheels and a ND Rear Spoiler (with integrated back up camera)! The car also had a front camera and plenty of monitors on the inside.

 

Silk Blaze :

Silk Blaze showed their ND Demo Car with a nice black, white & red theme. The car was showcasing their ND Front Lip, ND Front Bumper Duct, ND Side Steps, ND Rear Spoiler, ND Rear DiffuserND Quad Tip Muffler (made by Rowen). Wheels were 18” Work Seeker FX and looked really nice on there.

They also surprised us with some nice looking ND Seat Covers (contact us for availability). They have nice matching red stitching & carbon-like center. Fitment looked pretty spot-on.

 

Bonus : Cabana Rally 124

Cabana (the company that showed a BRG ND MX-5 http://rev9autosport.com/blog/cabana-brg-nd-miata-shop-car-at-tas2016/last year) came with a rally looking Fiat 124!

We hope you enjoyed our (short) coverage of Tokyo Auto Salon 2017! As you can see, there is a lot of diversity and that’s what makes the world of tuning more than awesome (it would be boring if we all looked the same, no?)! We have MUCH more awesome content to come throughout the year~

If you are interested in any of the parts shown, please don’t hesitate to send us an email for pricing and availability. Subscribe to our newsletter for update on new car parts for your car!

Rallybacker Hardtop for 2016+ ND MX-5 Miata Unveiled!

This morning, I didn’t expect to receive an email with pictures of a hard top. I received a short email from Rallybacker, not any description, just pictures. Subject was : Rallybacker New Part for ND.

I was in bed, just checking everything quickly and when I downloaded the pictures, I thought they were showing the ND Small Ducktail Spoiler (available soon). However, after looking more and zooming over the top of that car, I noticed that it’s actually a hardtop!

They promised me that they would come with a hardtop for the car (and specified that it would have a sexy shape), but I didn’t expect to arrive so quickly!

Now, let’s stop the suspense and show pictures of the ND Hardtop!

 

And one last just in case you didn’t have enough…

From the pictures, it looks like it reuses the factory window from the soft top. I am not sure if you can keep the soft top or if you need to remove it. Also, it looks like the front section stands higher (maybe for head clearance). I’ll have more details about it very soon.

UPDATE 2017-02-05
Here are some additional information we got from Rallybacker:
1. This hardtop goes OVER the genuine soft top. There are 4 points to fix it with bolts, but drilling is not required. It takes 5 minutes for installation.
2. Soft top stays up
3. Back window is the genuine window from actual soft top
4. It’s made of 1 piece
5. Target price is ~$2000-$2500 + shipping

You can contact us at info@rev9autosport.com if you’re interested in getting it.

The ND MX5 RF & NB Roadsters at Tokyo Auto Salon 2017

Here’s the interesting part of TAS2017 for the Miata lovers! We will do a coverage on Blitz, Bride, Mazda & Shorin. Check it out as it shows the newest parts coming for 2017!

You can check 2016’s coverage by clicking here, as there are some manufacturers who did not attend it this year. In the first part of this blog post, we’ll cover only the ND RF & NB from the show (rest of ND will be shown in next post):

Blitz :

Blitz came up strong this year by bringing one of the first fully modded ND RF in the world. Not only it has some pretty aggressive styling Front Bumper, Side Skirts, Rear Diffuser & Rear Spoiler, but it’s also rocking a 2.0L Turbo Kit, Quad-Tip Exhaust System & Front Strut Tower Bar! The car is also rocking the new Enkei PMF1 17” Wheels.

Mazda :

Mazda came up with two ND RF : a dark grey & soul red! They were bone stock, but always worth showing off!

Bride :

Bride came with a ND that’s mostly unmodified from the exterior except for their exterior decals. The car was also rocking the new Enkei PMF1 18” Wheels. Although, for the interior, Bride showed their newest bucket seat : the Bride Air Seats in a leather/alcantara finish. It fits  very nicely inside the ND and actually has a lot of room for “bigger” people!

Shorin :

Even though Tokyo Auto Salon is mostly about the newer cars, they also offer exposure for previous generations cars. This year, Shorin came with their wonderful NB rocking the Front Fender Flares, Rear Fender Flares, Front Underdiffuser & Rear Half Spoiler. The car is also on iForce Wheels FD11SDM 16×9 -29 & 16×10 -39.

 

For your information, all the NDs in Japan come with 1.5L engine and only the RF will be available with the 2.0L engine. This means that this year should be a pretty exciting year and we’ll see more and more high quality engine modification parts from Japan in the upcoming months! Future seems bright!

 

 

If you are interested in any of these, please don’t hesitate to send us an email for pricing and availability. Subscribe to our newsletter for update on new car parts for your car!

The new wheels from Tokyo Auto Salon 2017

This is my first post for our coverage of Tokyo Auto Salon 2017. You can check our other blog posts about TAS2016 that we attended last year, too.

 

This post will not be about Roadster-specific cars, but mostly about the new wheels that we saw from major manufacturers that can fit on Roadsters and that is new or available soon!

 

Let’s start with RAYS Wheels!

They came up with some nice new wheels for 2017!

Rays TE37 Sonic 16”

These are RAYS latest deign in term of light weight, concave and bold look. Pictured in gunmetal, this is the ultimate racing wheel that will fit the NA, NB & ND Roadsters.

Rays TE37VBA

Available in 15” and 17”, this wheel will be a great choice for the racers. I’m still waiting on details, but it seems to be a competition version of the regular TE37V that is anodized instead of being painted.


 

Rays CE28N Club Racer Scholarship

Available only in 15” & 16”, this wheel is aimed for those who get into racing. Being super light weight, it’s probably one of the greatest wheel you can get, but you also are only limited to one color and a few sizes.

 

 

Advan Wheels

Advan RZ-II

This is the new version of the classic Advan RZ. Released since a while, what is new for 2017 is the sizes. It’s now offered in 15” and 16” size, perfect for NA & NB Roadsters.

 

Advan RG-D2

This wheel also was released a little while ago, but now it’s offered in nice 15”, 16” and even 17” (maybe in ND fitment). It’s a beautiful 6-spoke wheel that combine concave and slight lip.

Enkei Wheels

Enkei AllFifteen

This is not for everyone, but it’s one very old school design and available in 4×100, so maybe this could suit some NA Roadsters.

Enkei RC-T5

This is available in 5 holes, so this could be a nice fitment for the NC Roadsters looking for a more Euro-look.

Enkei PFM1

This is probably going to be a very popular wheel for the ND Roadster. Available in 4×100 and 5×114.3, it’s another racing and lightweight design by Enkei.

326POWER

326POWER Yabaking Wheels

I’m not getting into all details of these wheels, but they are available in TONS of configuration and can be done in 16” or 17” in pretty much any width. Three models are available : 5-Spoke, 6-Spoke & Yabaking Mesh. Perfect for those looking at filling extra space from fender flares.

 

Work Wheels

Work Emotion MBR

This is the newest design from Work Wheels. It’s a very nice mesh look that’s available in multiple sizes and finish and allows concavity!

Work Equip 40

This is the 40th anniversary wheel of Work Wheels. Bringing back the old school look, I’m sure this will be an instant classic for the NA and NB Roadsters!

If you are interested in any of these, please don’t hesitate to send us an email for pricing and availability. We hope you enjoyed our first part of the Tokyo Auto Salon 2017 coverage! We’ll be back with more in the next couple of days! Subscribe to our newsletter for update on new car parts for your car!

Visit at Rallybacker (Featuring ND MX-5 Widebody)

During my last trip in Japan, I received a call from Rallybacker, as they knew I was about to visit Hiroshima, where their shop is. They kept the call short, but said that they wanted to show me some new products. As I visited them just a few months ago, I told them that if they didn’t have anything for Mazda Roadster, I would probably skip this meeting due to a very tight schedule. They just answered that they had awesome new products for the ND Miata, so I got pretty excited about it!

The owner picked me up at the train station and brought me to his shop. With the usual communication problem, we kept it simple. Talked about how warm it was and how sales were going. Just to put you in perspective, Rallybacker has released this kit for the Toyota 86 and it’s pretty amazing looking :

16pcs_1

If you never seen what a ‘’FRP Shop’’ looks like, this is where the magic happens :

dsc_0672

For those who don’t know, Rallybacker is a custom shop that does a lot of VIP and professional drift cars. The owner has a lot of experience and has been doing this job for about 30 years! They also released parts for the NC in the past, which you can order here. When you arrive at the shop, you can see they mean business:

dsc_0680 dsc_0681

Here’s an example of a very neat Mazda Atenza (6) on Work VS-XX.

dsc_0674

After contemplating the customer’s vehicles, I went straight to the Roadster. I was pretty happy to see a wide body car!

dsc_0677

You can see that this car will look awesome (actually, since I post this a while after I took the pictures, the final pictures will be shown at the end of this post). The ND Tall Ducktail Spoiler follows the lines of the car!

dsc_0664 dsc_0670dsc_0646 dsc_0647

Why is there an emphasis on the ‘’Tall’’? Because Rallybacker told me that they will release 2 kits for the vehicle. One will be for widebody car (as pictured) and one will be for stock bodied ND: smaller side steps, rear diffuser and a similarly shaped, but smaller ducktail spoiler!

Rallybacker tried to follow the aggressive lines of the ND and impose their design as well, which resulted of a pretty cool concept :

dsc_0642 dsc_0643 dsc_0644 dsc_0665 dsc_0666

The kit should provide an extra 30mm in the front and 50mm wheel clearance in the back.

The ND Rear Diffuser on this car is especially cool. It’s made of 3 pieces which makes it adjustable (on how wide it is) and it’s also pretty rad looking:

dsc_0641 dsc_0649 dsc_0653 dsc_0664

Rallybacker promised us that the pricing of the whole kit is going to stay within their standards which should be MUCH less than the Aimgain Fender Flares or TRA Kyoto Widebody Kit. They also innovate a lot, making the kit much cheaper to ship than their competitors.

As I mentioned earlier, finished car pictures is now available, so here you are:

15219637_1228036090606072_7294555437430481987_n 15220039_1228036053939409_1676894699977972420_n 15241941_1228036163939398_1657564889010616319_n 15284175_1228036070606074_7671048421855479969_n15193674_1228036160606065_7969037857255937212_n 15203383_1228036153939399_5674684123589278362_n 15284938_1228036087272739_5727152603328701023_n 15319185_1228036083939406_4234095934003580464_n 15337498_1228036073939407_2112363393702125989_n

You can see in the pictures their ND Fender Flares Kit, ND Tall Ducktail Spoiler, ND Rear Diffuser, ND Side Steps & ND Front Diffusers.

I hope you enjoyed our blog post on the Rallybacker ND Widebody Kit! It’s supposed to be on sale within a few days or weeks, so please don’t hesitate to contact us if you’d like to preorder the kit or separate components!

AVO Turbo Kit for 2.0L ND MX-5 Miata Now Available!

We are happy to be one of AVO Turbo World dealers for their newly released MX5 ND 2.0L (Skyactiv) Turbo Kit that produces 210whp & 210ft/lb of torque from the stock 13:1 compression engine!

You can read the full press release below:

AVO Turbo Kit for 2.0L & 1.5L ND MX-5 Miata

turbo_kit_1

AVO Turboworld has been a huge fan of the Mazda MX5 Roadster from the first NA6 Roadster released in 1989. AVO was impressed with the way they drove stock. It was even more impressive how they performed after a few modifications were made! AVO introduced the first turbocharger kit specifically for GEN 1 MX5 Roadsters (Miata), which paved the way to record-breaking performance at the track earning AVO serious recognition in the automotive industry. The all new Mazda ND Roadster featuring the SKYACTIV 1.5 and 2.0 liter motor has just been released. AVO noticed Mazda made a drastic shift by going back to their roadster roots which originally put them on the map among automotive enthusiasts. After extensive road tests, AVO felt the new lightweight ND MX5 was impressive right out of the gate, but it does leave a lot on the table when it comes to obtaining a more exhilarating experience you would expect from a roadster.

If you’re looking for the ultimate roadster experience, driving with the top down while carving your way to a rural destination is a must. But no matter how impressive the cornering capabilities are, the engine performance left us wanting much more. It lacks the “zip” feature you would expect from a small sports car. The exhaust tone was too quiet. We want to actually feel the engine working while driving in a more spirited fashion. AVO knew the potential was there waiting to be unleashed. This is what sparked a full year of design, engineering, and testing to create a complete turbocharger package. Just like all AVO products, the goal was to create a kit that incorporates an OEM high quality fit and finish. The final product is exactly what AVO feels the enthusiast desires and deserves.

The AVO Turbocharger Kit was designed to work for both RHD and LHD models in all countries. Extensive tests were performed in three countries on several different models, ranging from the Japanese Mazda ND 1.5L to the American and Australian Mazda ND 2.0L. The Japanese ND spent countless hours on the track under extreme conditions. AVO has a huge advantage over any competitor with the use of a local race track. This allows AVO to test products under high heat conditions gaining insight as to how the product and vehicle will perform while pushing the limits. While testing the Australian Market Mazda ND, AVO spent 4 months and over 10,000 km tuning in various conditions. While testing throughout America, AVO utilized 91 octane gas ensuring the car will perform as a dependable daily driver. These tests are necessary helping give confidence to the end user. Anyone investing in the AVO product will know that it will perform and maintain its reliability no matter where you’re located.

AVO designed this turbocharger kit specifically for the Mazda ND. AVO includes all the necessary supporting components. The turbo kit incorporates an AVO18/49 water cooled turbocharger with an internal wastegate using a 5psi actuator. The turbo mounts to AVO’s impressive custom stainless steel cast exhaust manifold. The exhaust manifold is ceramic coated combating excessive heat under the hood. The exhaust manifold was designed to bolt directly to the stock header and AVO’s upgraded ceramic coated stainless steel turbo outlet (also referred to as a downpipe). Keeping all that pressurized air cool is no easy task. AVO has you covered by including one of their industry leading aluminum bar and plate front mount intercoolers. The intercooler kit uses AVO’s world-renowned high quality reinforced custom black silicone piping.

AVO didn’t leave anything uncovered when making this turbo kit. AVO includes all the water/oil lines and fittings making this a true direct bolt on kit. No modifications are necessary making this kit an easy install. This turbo kit has been designed to bolt up to the stock air intake box base. AVO includes their Flat Panel Air Filter and Air Box Lid to maintain the OEM look. There’s no need to worry about the fuel system. During extensive testing AVO spent a lot of time ensuring it will work with the standard fueling system for a complete bolt on and drive setup. One of the most sought-after features of this kit was AVO’s ability to maintain the OE look! The oversized front mount intercooler has been specifically designed to fit with the standard bumper beam without trimming or modification. When the hood is popped it would be hard even for an enthusiast eye to recognize anything that’s been modified or tweaked for additional power.

There are two Tuning options : one is by AVO Turboworld via its Power + Reflash Tool that simply plugs in to the OBD Port and allows you to save your standard NA stock car file. Then by following the on screen commands, this will allow you to flash your car with the AVO Stage 1 base map that is provided with the purchase of the AVO Turboworld Stage 1 kit. Or for the customers who want more from their AVO ND Turbo kit with custom tuning an option of ECUTEK Race Rom is available.

So, what can you expect from this kit?

AVO’s testing at 5~6 psi on 91-octane gas In USA produced 210 whp (247 crank hp) and 210 ft/lbs of torque! And In Australia 138kw at the wheels with 275nm torque on 98 octane fuel. All this additional power tested safely on the stock fuel system! That’s a 50% power increase on pump gas, and you will see even better gains if you have access to higher octane gas!

The stock motor has blistering high compression ratio at 13:1, allowing fantastic low-end response when used in conjunction with the AVO turbo kit. This high compression ratio does make gas quality even more important than ever! Turbocharging a high compression engine and maintaining reliability was a little easier due to the all new SKYACTIV motor features. An incredibly well made combustion chamber along with a direct injection fuel system allowed AVO to take tuning to another level while maintaining the reliability of a stock engine. While many people may associate it with the old motors from Mazda, there’s absolutely no comparison! The entire design of the engine was improved tremendously from anything previously made by Mazda.

Mazda focused on much more than just the engine. The technology surrounding the ECU has grown light years from previous models. Cylinder knock detection and variance in the AFR (Air/Fuel Ratios) react incredibly fast. This lightning speed feedback allows the car to adjust ECU parameters better in extreme conditions. What does this mean for you? Your car will maintain efficiency at a safe level ensuring the most power and throttle response. The new direct injection improves both power and gas mileage tremendously. AVO has managed to maintain fuel consumption same as stock, and in some cases better mpg under normal cruising speeds on the highway. Unfortunately mpg is going to be dependent on your right foot and how much fun you’re having. We know from experience!

The AVO Turboworld header back exhaust system features all the new GEN II design aspects. Constructed out of 2.5” durable stainless steel and incorporates a high flow muffler all tucked under the rear bumper in the OEM position. The 4” polished single rolled style exhaust tip is adjustable allowing you to customize the look and feel of your exhaust system. There’s a noticeable dip in the factory torque curve. AVO combats that performance decrease by offering you a 5” high flow metal cat converter located in the downpipe. The reduced back pressure in the AVO’s exhaust system will improve performance throughout the entire rev range. The tone is improved, adding a sporty note from the rear of the vehicle. All of these added features help improve the overall performance by directly putting power to the ground where it belongs!

If you want real world driving numbers, AVO has them! In stock form, the Mazda ran from 40kmh to 80kmh in 5.9 seconds during a 3rd gear pull. After they installed the AVO turbo kit, the Mazda dropped down to 3.4 seconds! The AVO Turboworld Stage 1 will truly excite all Roadster enthusiasts with these gains!

Why AVO’s Turbo kit over other Turbo kits?

AVO Turboworld has been manufacturing bolt on turbo kits for over 30 years. Their goal has always been to manufacture the turbo kit with the same look and feel you would expect out of a high quality OEM part. This saves you money during installation and having to source or modify custom components when adding a turbo kit to your NA model. AVO is the manufacture of these kits. We can support the product and customers who invest in AVO’s turbo kits. If you ever run into an issue due to wear and tear or damaged product, AVO can get you the correct part you’re trying to source.

Because AVO has such a strong background in R&D and testing, they found that a straight 4 cylinder manifold is susceptible to cracking over time. The factory tubular design has proven to fail prematurely. AVO manufactured a Cast Stainless Steel Manifold giving customers a product they can depend on.

Their intercooler tanks are made from cast aluminum to get the best flow and reliability. All intercoolers are pressure tested from the factory and powder coated to make sure the product is protected from any debris or grime from daily road driving.

The AVO Turbocharger suits many performance options. It works amazingly well for low boost applications running the 5psi actuator on pump gas. It also has enough headroom for customers who’ve gone beyond stock engine components running 15psi on a 2.0L engine equipped to handle E85 fuel producing 400whp.

Under normal conditions this kit can be installed in 7-8 hours from start to finish. This job is much easier to perform using a lift and proper tools. One of the hardest portions of this install is removing the stock header. You’re required to remove the engine mounts which will make installing the turbo kit much easier. Any installation shop will need the ability to weld the turbocharger oil drain fitting. You also have the option to purchase the pre welded oil pan from AVO. The only modification to any OEM part is to the plastic under tray beneath the engine. It needs two 2.5” holes to be cut with a box knife or cutting tool. This will allow proper fitment of the silicone intercooler pipes. Other than that, the installation is straight forward for most independent technicians or DIY’s.

Turbo Kit (Stage 1) includes :

AVO 18/49 Turbocharger with Ceramic Coating
AVO Stainless Steel Cast Exhaust Manifold with Ceramic Coating
AVO Water and Oil Hosing & Fittings.
AVO Stainless Steel Front pipe with Ceramic Coating
AVO Bar & Plate Front Mount Intercooler with Reinforced Silicone Hosing & Powdercoated Steel Piping
AVO OEM BOV Kit
AVO Air Box Top Lid with AVO Drop-In Air Filter
AVO Power + Plug and Play Reflash Tool

Ready to purchase? Here are your options:

AVO Base Turbo Kit

AVO Stage 1 Turbo Kit

AVO Stage 2 Turbo Kit

Fujimura Exhaust For 2016+ ND MX-5 Review

There is an ancient proverb that says: “Loud Pipes Save Lives”. This is particularly true when your car looks invisible to most truck drivers. I’ve always had Miatas with aftermarket exhausts and never liked them to be ultra loud. In my NA, I was rocking the RS*R Invidia Exhaust (which had a slightly louder tone than stock, but with a much sportier sound). In my NB, I had the RS Factory Stage N-Zero2 Exhaust which was pretty silent until you hit full throttle. Those were some nice “feeling” mods as you could hear the engine as you pushed it.

When I first got my ND, I sometimes had difficulty hearing the engine because it was so quiet. Mazda did an awesome job at making the car SUPER silent. By good job, I mean, you can literally run the car without its muffler and it does not sound *that* bad (try it when you change your exhaust, you’ll see). The stock catalytic converters and mufflers coming from the mid-pipe make the exhaust noise almost impossible to hear (this is also why they include a sound enhancer, otherwise you really can’t hear the engine).

I had the choice of a variety of awesome exhaust setups, but I decided to go with the least expensive and probably most “extreme” exhaust we sell. I went for the Fujimura Gentle Sound Muffler. Ironically, it does not sound gentle at all. It sounds mean and awesome. Don’t worry, there are video clips later in this post.

So, here’s my complete review:

Installation:

Installation couldn’t be easier. The stock exhaust is held by 2 bolts and 4 exhaust hangers.

DSC_0148

Just remove the 2 bolts and then play with the hangers to get the exhaust out. Do this when the exhaust is cold… otherwise you might hurt yourself. I suggest doing this with someone else, as, otherwise the exhaust may fall on your face or on the ground while you’re trying to remove it.

After that, just take 1 of the OEM exhaust hangers and put them on the Fujimura exhaust. The exhaust is so light (3.3KG) that it only needs to have one mounting point.

DSC_0149 DSC_0151

Voilà, your exhaust is installed!

DSC_0152 DSC_0156

If it takes you more than half an hour to do this, you probably should not work on cars. It’s that easy to install.

Looks:

The Fujimura Gentle Sound Exhaust is pretty subtle. It’s a single-tip exhaust that has a slightly angled shape to make it as direct as possible. When the exhaust is not installed, you can basically see right through. The muffler and tip is polished for a neat look.

DSC_0155 DSC_0157

As with any shiny part that’s just a few inches from the ground, it gets dirty. At some point, if you are as careless as me, the finish becomes more silver than polished. It can be brought back to its original glory, but I didn’t get round to it yet.

DSC_0232

Still, could we say that after a while it’s less of a “cop-magnet”?…. Maybe.

DSC_0245 DSC_0267

There is also a fancier version of this exhaust: the Fujimura Limited Edition Exhaust with a beautiful titanium tip. I didn’t want to go too fancy for once and took the regular one.

Noise:

This is the important part, isn’t it? The Fujimura Gentle Sound Exhaust is made to give the car a deep and sporty sound. The president of Fujimura Auto tests various muffler setups until he finds the perfect tone. In addition, he created (possibly) the lightest exhaust setup available for the ND Miata.

When you start your car (going from stock exhaust), the first thing that enters everyone’s head is, “Oh my…”. It *sounds* really loud at first. The reason is simple: the stock exhaust is VERY silent. When driving, you’re like, “this is going to be annoying”. But after a while, you really enjoy it. I have to say, you really get used to the super quiet OEM exhaust. When I had both my NB and ND, if I went from my ND to my NB it felt like it was ULTRA loud. However, compared to other sports cars, it was just normal. When I went to Miatas At The Gap and saw tons of NAs, NBs and NCs, I understood that my ND was not even close to loud compared to other muffler setups. Still, everyone (and I mean everyone) loved the sound of the ND with the Fujimura muffler. It does not sound like a cheap racing exhaust; there’s absolutely no raspiness, which I love.

I took quite a long ride with it. I did over 5000 miles of driving through the USA and the exhaust never annoyed me. At full throttle, it has a sporty tone. When going slow, it has a deep drone. When driving on the highway with cruise control, it’s silent. I’m not kidding — you can’t hear it at all, it’s pretty amazing. From cruise control, when you decelerate or accelerate, then you can hear it. And that’s pretty nice, because as I said, “Loud Pipes Save Lives”. On many occasions during my road trip, I needed to let other cars on the road know I existed, otherwise they would have bumped me. That exhaust gets you noticed when you need it.

I’ve heard other ND muffler setups, but they didn’t impress me much. I like to hear my car when I drive, so I can actually “feel” it. The stock ND really lacks that feature. Now, it just feels like I’m connected to the vehicle.

Alright, enough talk, let’s hear it!

Start + Drive

Coming Back + Down Shifting

Passing Through (Windy… sorry!)

Acceleration

Revving + Slow Launch

Launch

Acceleration

A lot of videos, but I still don’t think they show the real awesomeness of the noise. I used my Nikon Camera and it was quite windy. Sometimes I was too close, which altered the sound a bit.

Here are 2 more videos to show you the noise:

During Dyno :

Inside Video (Deal’s Gap) :


Overall, I’m super satisfied with the Fujimura Gentle Sound Muffler. It’s an awesome sounding piece that helped me avoid a few highway incidents. Some people might think it’s too loud, and I have to say that it’s not for everybody. However, everyone who followed me (as well as me following my very own car) enjoyed the beautiful tone of this muffler.

1245131_1

5000 miles in a 2016 (Modified) ND MX-5 Miata

If you followed my whole adventure: The Road(ster) Trip, you probably noticed that it was a LOT of mileage on a non-stock vehicle. The car is lowered (on coilovers), has wider tires, a loud exhaust, a few engine modifications, minimal chassis bracing and some comfort modifications. It’s not heavily modified, but it’s far from having the same feeling as the stock car, too.

Here is my review of how the modifications affect the overall feel of the car during long distance driving and on a few mountain roads.

First of all, some of you may see this as a sales pitch for my products. I have to say that I totally endorse them and couldn’t be happier with them. Are there some less expensive options? Probably. Are there some better products? That’s possible. As far as I’m concerned, I always prefer to run the higher quality parts to the cheaper ones. In the long term, the resale value of the quality parts stays high, you don’t have a car that looks the same as 100 other ones and you are not afraid of failure because of quality control (all our parts meet the highest standards for quality).

So, in no particular order:

Suspension Review

I am running the Cusco Street Zero Coilovers. These are in no way meant to be raced, but still, they managed to be pretty awesome on the mountain roads (see the videos I did when I was at Deal’s Gap). I felt like the car still had some slight body roll due to its suspension being on the “softer” side, but coming from the OEM Bilstein to these made a very big difference. The Bilstein are very hard and probably aimed more towards racing. The Cusco provided me with the look I wanted and gave me SO much extra comfort; it made the car a pleasure to drive. After 5000 miles, I feel like I made the car a nicer “street car” than what it was on stock suspension. However, if I were to race the car, I’d probably go for a firmer suspension with more adjustments. Overall, since I raised my suspension by 10mm, the car can be driven pretty much everywhere without worrying much about bottoming out.

It is hard to notice from the looks, but it made a HUGE difference.

Before:

DSC_0953

After:

DSC_0986

Wheels & Tires Review

I absolutely love the look of my Advan RZ 17×8 +35 wheels, and it seems that everyone who saw the car in person had the same opinion. The concave spokes give the ND a much more aggressive look. The fact that they are lightweight and solid made me confident driving everywhere with them and did not affect the performance of the car in a negative way. The 8” width paired with slightly wider tires gave the car more grip than stock and a very nice road feel.

DSC_0108

The Yokohama S.Drive were nice tires for rain and overall driving, but they were really bad during spirited (or semi-racing) driving. I was not very confident pushing the car too much on corners and would keep the traction control ON all the time since the tires were slippery when they were abused. Their only good point would be that even though I did 5000 miles and so many runs at Deal’s Gap, while having some camber, they didn’t wear out much.

DSC_0990

I’ll probably go for some stickier tires next year. It seems like Bridgestone RE71Rs are the way to go.

Brake Pads Review

I changed my stock brake pads for some pads that ACRE recommended to me: the Acre Light Sports Brake Pads. They said that these are perfect for those who don’t do competition racing and intend to drive the car in a more aggressive way. I gotta say, these pads are damn near perfect. They grip sooner, they don’t seem to fade at all and they really give a more aggressive feel to the car. The OEM ND pads are great, and when you come from a NA and NB, you feel like the ND is a braking monster. But, when you’re used to the ND and switch to better brake pads, it’s day-and-night difference. I loved the fact that they did not produce too much brake dust, they didn’t squeal at all and did not need to be warmed to be efficient. During my runs at Deal’s Gap, they were great and reminded me that my tires were not so great.

DSC_0153

Knuckle Brace Support Review

One little modification that I really enjoyed was the Nielex Knucle Support Brace. After installing it, I didn’t have to correct steering much during highway driving and it felt like a totally different vehicle. The front end was much stiffer and it felt more “solid” with much less flex towards the front suspension. There’s a whole debate about it on some forums, but in my experience, everyone who tries it can really say that there’s a difference between this and stock. It’s personally one of my favorite modifications and Nielex told us that they sold hundreds of them to ND owners who all appreciate it. Some people who tried the car said that the feeling is similar to adding a bigger front sway bar to the vehicle. To me, it felt like the car was much more “connected” to me.

DSC_0060

(Picture taken from my visit at Nielex in Hiroshima. Blog post coming soon)

1245132

Exhaust Review

I’ll keep this one short, as I’ll post a full review of the Fujimura Gentle Sound Exhaust in the next days or weeks. At first, I was not sure about running a single tip exhaust that was a bit angled. After a while, I got used to it and really started to like the minimalistic look.

I first thought that the exhaust was extremely loud, but it seems that the ND is just VERY silent from factory. When compared to NA, NB and NC, it seemed that my exhaust was not much louder than other cars. One thing I have to say is that it feels awesome to hear the vehicle when you push it (which you don’t get with stock). But when driving on the highway, the exhaust becomes silent. No annoying drone or anything to make a long trip abominable. On cruise control, we really couldn’t hear it.

Also worth noting is a point a friend of mine made: Loud Pipes Save Lives. That’s very true; when you pass trucks (or higher vehicles), you can just put the pedal to the floor and they’re guaranteed to know someone’s next to them. It helped me avoid many incidents during this trip.

DSC_0125

Intakes Review

I am running the Autoexe Sports Induction Box paired with the Odula Air Filter as well as the Odula Intake Elbow (prototype). I can’t really say that I felt any difference in power. The Autoexe piece might actually have made things worse when I was in the South USA because it would suck some hot air. That said, the car still felt good and did not have issues, even in heavy rain.

DSC_0108_2

The sound from the intake, however, really was nice and cool to hear. I’d say that for me (living up North), it’s a good setup, but not optimal. Let’s say that it’s more of a “sound enhancement” than a performance upgrade. Still, my car is in no way meant to be a competitive racer, so I just enjoyed it. I’m patiently waiting for Japanese companies to release a nice and effective 2.0L Intake Option.

DSC_0145

Seat Covers Review

One thing that everyone who sat in or drove my car said was: “I can’t believe how comfortable those seats are”. I have to agree with them 100%. Putting on those Autowear Seat Covers was one very nice comfort modification. The middle piece of the seat cover has a ~0.5” play so that when you sit on it, your spline does not directly touch the seat. It’s hard to explain, but it makes the seat super comfortable and I can say that after driving 5000 miles in the car, I did not have any back pain. The OEM seats are great, but adding the covers just made them much more comfortable and really great for long distance driving. I’ve actually never felt fatigue on my back since I’ve had them. Also, the synthetic leather is non-slippery and spill safe, so it’s pretty great overall.

DSC_0015

Steering Wheel Review

I will also do a full review of the steering wheel later, so I’ll keep it short again. I put the REAL Japan Leather Steering Wheel in my car. It’s a D-Shaped Steering Wheel with perforated leather. I gotta say that during the whole trip, it felt great. The grip was awesome, it never became slippery and it was thicker than the OEM. The “bumps” on the steering wheel at 3 o’clock and 9 o’clock also felt great during spirited driving.

After 5000 miles, you can see that the perforated leather got dirty (from sunscreen), but other than that it still looks the same and shows no sign of use. I guess I’ll be able to clean the sunscreen inside the holes somehow with a good washing product.

I would say that there is no way I would ever come back to the original steering wheel after having such a quality steering wheel in my hands. The original one just feels cheap compared to this thicker and nicer looking one.

DSC_0957

Front Spoiler Review

I installed the RS Factory Stage Front Spoiler during my trip. I have to say that I have mixed feelings about it. While I really love the look of it, I think it made me lose some “travel” with the front end of the vehicle. In the past, the lowest points of the vehicle were the two diffusers in front of the front wheels, and I would scrape them every now and then. Now, the front spoiler is the part that scrapes everywhere. Before installing it, I could enter my driveway (super steep) without scraping and now here’s what it does…

It’s a nice looking part and the issue is probably more my driveway that’s at a terrible angle, but for me, it might be a part that’s going to be removed in the future. Still, the look is very nice and mimics the look of a front lip without paying the high price for it.

DSC_0152

Tow Hooks Review

The Beatrush Tow Hooks were pretty cool to have on the shop car. It gave the car a nice racing look and also saved the paint of my bumper when parking in the city. I know they are not intended to be used to protect the bumper, but I decided to use them this way. On a long road trip, including multiple big cities, things happen. And I know for a fact that the bigger the cities are, the less people care about their cars. That’s why it was a nice feeling to park the car with the hooks and not care about having someone else’s paint on the car. It’s also very easy to install and remove, so, for me, it was pretty useful. I quite like the look, so I keep them on all the time.

DSC_0140DSC_0123

Cellphone Holder Review

I wouldn’t usually even consider this a mod, but oh my god it was a great feature to have. The ZOOM Ventilation Cellphone Holder is so convenient to use, and allows you to put your phone in a nice location to use WAZE or just select music. It can be rotated so you can use it vertically or horizontally. Instead of having your phone jumping around inside the car, it’s held firmly and conveniently. I’m actually putting this phone holder in all my other cars because it’s so nice to have. The great thing too is that it’ll work with any phone or case and you can put your phone in it with one hand in less than a second. The position in the ND is great — the only drawback is that you lose a bit of ventilation, but it’s no big deal (after 5000 miles and different types of weather, I’m talking from experience).

DSC_0137

Part I wish I had

After 5000 miles, there are features that you realize you wish you had. One part I wish I had was Wide Angle Mirrors. When the top is down, it’s no big deal. However, when the top is up, the dead angle on the mirrors is just ridiculous. I almost had a few accidents because I couldn’t see the car in the dead angle. I know from experience (because I ran them in my NB), the wide angle mirrors solve that problem. Also, the blue tint from the mirrors is great against fatigue at night and when being followed by cars with high beams.

That’s pretty much the only thing I felt would make the car perfect. Other than that, the whole package from the ND is pretty awesome as-is.

DSC_0004

Well, this was the review of most parts I installed and how they improved my overall trip over having a stock car. I’m certain the stock car is awesome for road trips, but I feel I improved it in so many ways it became a perfect car for road tripping. I want to say that this is an honest review about the parts we offer for the ND that I felt were great to have during a long road trip. Some may agree, some may disagree with my sayings, but I can confirm that they were great for this 5000 miles trip.

DSC_0962

Next year, I’m considering doing the whole of the USA and Canada for REV9’s 10th Anniversary, so many of these parts will be tested for longevity too. However, it’s very possible that I’ll run other parts, depending what’s new on the market~

 

 

 

 

The (Road)ster Trip – Vermont & Home (The Final Part)

After doing some sightseeing in Boston, I headed to my final USA destination: Burlington, Vermont (and then home, to Quebec, Canada). I was sad the awesome trip was coming to an end, but at the same time I was starting to feel that I deserved to sleep in a real bed. I was getting closer to it.

My stop in Burlington did not include any car meetings. I was just there to enjoy the beautiful scenery and local craft beers:

image1

I temporarily traded the ND Demo Car for a nice Westfalia…

image2

I was in town during a Sublime with Rome show as well as a Dirty Heads show. Since I’m a huge reggae fan, I decided to attend Ciderstock (anmusic festival where they serve you cider). It was pretty inviting:

image3

It was a nice way to finish this trip and relax.

Dirty Heads – Lay Me Down Live

I took advantage of the beautiful scenery and did a quick photoshoot with the awesome view I had:

DSC_0213 DSC_0214

During the trip, I noticed something interesting. It seems like my car (or its color) makes insects fly around it (or jump on it).

DSC_0215 DSC_0216

It wasn’t just grasshoppers; dragonflies were always around me too. I hate dragonflies.

While the trip was coming to an end, I was so glad I could visit so many states this summer. It was an awesome experience and always reminds me of how perfect these little cars are. They just ask to be driven.

DSC_0218

I came home to pretty deceiving weather, but I was glad to be back in my bed.

rain

At the end of this trip, my car was clocking just shy of 9000 miles on the odometer.

image4

That whole ~1 month trip ended up putting over 5000 miles on my car. It was an amazing experience and a perfect test to see if this car is a road trip machine. I gotta say that it passed the test successfully.